JERBINDO MJPS-650-JPN 650 kVA Mitsubishi

Generator JERBINDO MJPS-650-JPN — Open Frame

Generator JERBINDO MJPS-650-JPN — Silent

Generator JERBINDO MJPS-650-JPN — Silent Mobile

Open Frame

*Photo is a product illustration; actual specifications may differ.

Prime Power: 650 kVA; 520 kW
Standby Power: 715 kVA; 572 kW
RPM / Frequency: 1500 rpm / 50 Hz
Fuel Use (75% load): 104 L/hr

JERBINDO MJPS-650-JPN is a diesel generator rated at 650 kVA prime and 715 kVA standby, powered by a water-cooled Mitsubishi S6R2-PTA engine with a Stamford alternator. The unit is designed for power needs in factory, commercial complex, project site, with high operational reliability and optimal fuel efficiency.

Reliable Solution For

Factory
Commercial Complex
Project Site

Engine System

Cooling System	Water Cooled
Engine Brand	Mitsubishi
Engine Model	S6R2-PTA

Engine Specifications

Aspiration	Turbocharged, Charge Air Cooled
Cylinder Arrangement	6 Inline
Cylinders	6
Displacement	29.96 L
Bore	170 mm
Stroke	220 mm
Governor	Electrical
Max Engine Power	634 kWm

Alternator

Brand & Model	Stamford S5L1D-F4
Power Factor \| Voltage	0.8 \| 380 V

Power Output

Prime Output	650 kVA \| 520 kW
Standby Output	715 kVA \| 572 kW
Voltage \| Frequency \| Speed	380 V \| 50 Hz \| 1500 rpm

Unit Dimensions & Weight

Dimensions and weight for this unit are prepared per project. Contact us for open type and silent canopy technical drawings.

Units ship as open type as standard. Silent canopy dimensions are indicative and may change with the canopy specification (noise level, fuel tank capacity, service access).

Fuel Consumption

100% Full Load136 L/hr
75% Typical Load104 L/hr
50% Light Load74 L/hr

Unit Highlights

Water cooling: stable thermal performance in intensive operation in tropical climates
1500 rpm speed, optimal for fuel efficiency under daily operating loads
Stamford alternator: keeps output voltage stable for sensitive equipment
Measured fuel use of 104 L/hr at 75% load: predictable operating costs

Frequently Asked Questions

Which operating environments suit the JERBINDO MJPS-650-JPN best?

This unit is designed for factory, commercial complex, project site. With water-cooled operation and a prime rating of 650 kVA, it supports continuous and backup operation in facilities that need high reliability.

When should I use the prime rating and when the standby rating on this unit?

The 650 kVA prime rating applies when the generator is the main power source under varying loads, for example at sites without a stable grid supply. The 715 kVA standby rating is for backup during outages, with use limited to no more than 10% of total annual operating hours.

Is this unit available as both open frame and silent canopy?

Yes. JERBINDO units come as an open frame for enclosed engine rooms and with a silent canopy for areas that need lower noise. Dimensions and weight differ by configuration; state your preference when requesting a quotation.

What should I prepare before requesting a quotation?

Prepare your estimated total load in kW or kVA, the operating type (prime or standby), the installation location, your enclosure preference (open or silent), any ATS or AMF panel needs, and your target operating date. This helps our team recommend the right unit and price.